Shop headings: New Spares | Used Spares | Accessories | Brands
Dimensions:
35mm ID x 55mm OD
Steering head bearing, see SUA81079 for upgraded bearing kit
2 required per bike
Order now and we will post your order within 7 days.
AP8110077
£48.34
INC VAT
£40.28 EX VAT
Get your bike running smoothly. The 2-column Carbtune Pro is for twins and will help you get your bike running smoothly and at its most powerful
Suitable for carb and fuel injected models
This part is due back in stock soon, call 01484 841395 to reserve yours
£65.70
INC VAT
£54.75 EX VAT
Piston ring compressing tool, compresses piston rings to fit into bore. Without this tool you risk snapping piston rings, the tool also speeds up the fitting of new rings
For 57mm - 125mm bores, supplied with hex key for bore adjustment. Not suitable for CARC models
This part is available by special order, request a quote
£48.00
INC VAT
£40.00 EX VAT
Dimensions:
Diameter 37.5cm
Stylish large red and silver wall clock in the shape of a bacon slicer flywheel from a classic Moto Guzzi Falcone.
Ideal for the kitchen, living room or workshop and will make a great gift. Clock face made from steel.
This part is available by special order, request a quote
£78.00
INC VAT
£65.00 EX VAT
Dimensions:
47mm long
Pivot pin / needle suitable for PHF / VHB / PHM and PHBH carbs
Float pin also known as Guzzi ref. 17933167, 061527346
This part is due back in stock soon, call 01484 841395 to reserve yours
13933100 GU13933100 13 93 31 00
1393 3100 1393.3100 13.93.31.00
£13.50
INC VAT
£11.25 EX VAT
Dimensions:
700mm length, 430mm wide, height 400mm. 195mm diameter headlight opening
Stylish fibreglass Imola fairing ideal for your home built Guzzi cafe racer. Supplied unpainted and undrilled. Brackets and screen not included.
Designed to work with 750SS / 900SS screen. See CFA00076 for a screen and LIA97595 for a compatible LED headlight
This part is available by special order, request a quote
079703958
Also fits Ducati 750/900 SS & SSD
£100.40
INC VAT
£83.67 EX VAT
Dimensions:
225mm width, 640mm long (excluding plate hanger), 650mm hump
Classically styled humped race seat unit with built in number plate hanger and recess for tail light ideal for your home built cafe racer. Supplied unpainted and undrilled. This seat pan is designed for early Tonti frames but may fit other models with appropriate modifications
Mounting brackets and seat cushion not included
This part is available by special order, request a quote
£104.80
INC VAT
£87.33 EX VAT
Dimensions:
M6 x 13mm
Shouldered retaining screw for rocker cover. 4 required for each cylinder head
Rocker cover bolt. We recommend that you check length of bolts on your engine before ordering as two lengths of bolt were used. Supercedes Guzzi ref. 976591
See ENA83249 for rubber sealing washer on CARC models and ENA06716 for sealing washer on other models. See SSA84291 for titanium alternative to this bolt
This part is available by special order, request a quote
842291 MG842291
£3.20
INC VAT
£2.67 EX VAT
Reconditioned starter motor and solenoid for 2006 on models in black and silver finish. These units are high quality OE parts made by Bosch or Mitsubishi. Professionally reconditioned and sold with a 12 month guarantee
This is an exchange only item, we can supply these before receiving your exchange unit subject to a refundable deposit so you can keep your bike on the road. See ELC10737 for the refundable deposit. Send your old starter motor to our registered address (see bottom of page). Not interchangeable with Valeo and Bosch starters from earlier models.
NB In case of starter motor problems do not tap the casing as this will certainly cause it to fail. Also known as Guzzi ref. 97729R
05730730 GU05730730 05 73 07 30
0573 0730 0573.0730 05.73.07.30
£195.00
INC VAT
£162.50 EX VAT
£16.60
INC VAT
£13.83 EX VAT
Secure online shopping 
